CEZIUM
1 / 2
132 kW two-stage screw compressor
Lubricated compressorCZ-SLTT-132VCE · PED · ISO 50001 · ISO 9001

132 kW two-stage screw compressor

132 kW two-stage screw compressor: 132 kW (175 HP), up to 27.9 m³/min, 8 to 13 bar, 74 dB(A).

On request
Quoted within one working day on your flow and pressure.
Request a quote →
132 kW
Power (175 HP)
27.90 m³/min
Flow at 8 bar
8 / 10 / 13 bar
Pressure
74 dB(A)
Noise level
ReferenceCZ-SLTT-132V
Motor power132 kW / 175 HP
Flow at 8 bar12.55 - 27.90 m³/min
Flow at 10 bar11.29 - 25.11 m³/min
Flow at 13 bar9.46 - 21.03 m³/min
Available pressures8 / 10 / 13 bar
Noise level74 dB(A)
Air outletDN65
StartingVFD
DriveDirect
Voltage400V/50Hz/3Ph
Dimensions (L × W × H)2720 × 1700 × 2060 mm
Weight3,500 kg
Energy at 4,000 h/yr, full load≈ 528,000 kWh
ConformityCE · PED · ISO 50001 · ISO 9001

What goes with it

Sized on this machine's flow. Air quality is decided here, not in the compressor.

2-year warranty, 5 under supervision

Three extra years for as long as the machine stays supervised by SEENTINEL and its maintenance is kept up to date; otherwise the warranty reverts to two years. Parts available for 10 years, shipped within 24 to 48 hours in France.

Quote this machine →

The dryer for this machine

Chosen on this machine's flow and pressure: the tightest fit, then one size up. A hot room or hot inlet air is corrected with the quote.

27.90 m³/min at 8 bar
Refrigerated dryer+2 to +10 °C

Workshop air: the air no longer condenses in a heated workshop.

Adsorption dryer−40 °C

Dry air: water no longer forms, even outdoors in winter.

Why this machine

1,500 rpm, no more

At full load, the air-end turns at 1,500 rpm, driven directly by the motor. The SKF bearings fitted on the range are rated for 80,000 to 100,000 hours, i.e. ten years at 8,000 hours a year.

Two stages, 6 to 11% less energy

The US Department of Energy's Compressed Air Sourcebook puts the gap between a two-stage machine and a standard screw at 6 to 11%. On a 132 kW at full load, 8,000 hours a year, that represents 63,000 to 116,000 kWh.

The drive follows the workshop

Permanent magnet motor and drive: the machine produces what the workshop consumes, with no off-load running. The 75 kW modulates from 7.56 to 16.8 m³/min, i.e. from 45 to 100% of its flow.

How it works →
Request a quote