132 kW low-pressure screw compressor
132 kW low-pressure screw compressor: 132 kW (175 HP), up to 36.41 m³/min, 3 to 5 bar, 76 dB(A).
Specifications
| Reference | CZ-SLTLS-132S |
| Motor power | 132 kW / 175 HP |
| Flow at 3 bar | 16,38 - 36,41 m³/min |
| Flow at 4 bar | 13,55 - 30,13 m³/min |
| Flow at 5 bar | 11,69 - 25,98 m³/min |
| Available pressures | 3 / 4 / 5 bar |
| Noise level | 76 dB(A) |
| Air outlet | DN125 |
| Starting | Y-Δ |
| Drive | Direct |
| Voltage | 400V/ |
| Dimensions (L × W × H) | 2900 × 1830 × 2000 mm |
| Weight | 4 800 kg |
| Energy at 4,000 h/yr, full load | ≈ 528 000 kWh |
| Conformity | CE · PED · ISO 9001 |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Dryer 45 m³/minRefrigerated dryer (air) · CZ-DM400NF
Filtration 40.2 m³/minFilter elements · CZ-ELEM-400
Air receiver 8 000 LVertical tank · CZ-TANK-V8000Two extra years for as long as the machine stays supervised by SEENTINEL; the warranty reverts to three years if supervision ends. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →Why this machine
Air-end designed for low pressure, instead of an 8 bar compressor turned down: for the same flow, the air is not compressed higher than it is used.
Twenty-seven sizes from 22 to 250 kW, from 6.1 to 68 m³/min between 3 and 5 bar, for uses that consume a lot of air at low pressure.
Compress only to the pressure required: each bar avoided saves about 7% of energy, according to the US Department of Energy's Sourcebook, over the whole life of the installation.