185 kW low-pressure screw compressor
185 kW low-pressure screw compressor: 185 kW (250 HP), up to 44.03 m³/min, 3 to 5 bar, 76 dB(A).
Specifications
| Reference | CZ-SLTLS-185S |
| Motor power | 185 kW / 250 HP |
| Flow at 3 bar | 19,81 - 44,03 m³/min |
| Flow at 4 bar | 18,45 - 41 m³/min |
| Flow at 5 bar | 16,37 - 36,38 m³/min |
| Available pressures | 3 / 4 / 5 bar |
| Noise level | 76 dB(A) |
| Air outlet | DN200 |
| Starting | Y-Δ |
| Drive | Direct |
| Voltage | 400V/ |
| Dimensions (L × W × H) | 4250 × 2280 × 2550 mm |
| Weight | 7 000 kg |
| Energy at 4,000 h/yr, full load | ≈ 740 000 kWh |
| Conformity | CE · PED · ISO 9001 |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Dryer 45 m³/minRefrigerated dryer (air) · CZ-DM400NF
Air receiver 10 000 LVertical tank · CZ-TANK-V10000Two extra years for as long as the machine stays supervised by SEENTINEL; the warranty reverts to three years if supervision ends. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →Why this machine
Air-end designed for low pressure, instead of an 8 bar compressor turned down: for the same flow, the air is not compressed higher than it is used.
Twenty-seven sizes from 22 to 250 kW, from 6.1 to 68 m³/min between 3 and 5 bar, for uses that consume a lot of air at low pressure.
Compress only to the pressure required: each bar avoided saves about 7% of energy, according to the US Department of Energy's Sourcebook, over the whole life of the installation.