250 kW low-pressure screw compressor
250 kW low-pressure screw compressor: 250 kW (335 HP), up to 67.95 m³/min, 4 to 5 bar, 80 dB(A).
Specifications
| Reference | CZ-SLTLT-250T |
| Motor power | 250 kW / 335 HP |
| Flow at 4 bar | 30,58 - 67,95 m³/min |
| Flow at 5 bar | 29 - 64,54 m³/min |
| Available pressures | 4 / 5 bar |
| Noise level | 80 dB(A) |
| Air outlet | DN150 |
| Starting | Y-Δ |
| Drive | Direct |
| Voltage | 400V/ |
| Dimensions (L × W × H) | 3800 × 2250 × 2350 mm |
| Weight | 8 100 kg |
| Energy at 4,000 h/yr, full load | ≈ 1 000 000 kWh |
| Conformity | CE · PED · ISO 9001 |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Two extra years for as long as the machine stays supervised by SEENTINEL; the warranty reverts to three years if supervision ends. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →Why this machine
Air-end designed for low pressure, instead of an 8 bar compressor turned down: for the same flow, the air is not compressed higher than it is used.
Twenty-seven sizes from 22 to 250 kW, from 6.1 to 68 m³/min between 3 and 5 bar, for uses that consume a lot of air at low pressure.
Compress only to the pressure required: each bar avoided saves about 7% of energy, according to the US Department of Energy's Sourcebook, over the whole life of the installation.