75 kW low-pressure screw compressor
75 kW low-pressure screw compressor: 75 kW (100 HP), up to 20.84 m³/min, 4 to 5 bar, 68 dB(A).
Specifications
| Reference | CZ-SLTLT-75T |
| Motor power | 75 kW / 100 HP |
| Flow at 4 bar | 9,37 - 20,84 m³/min |
| Flow at 5 bar | 8,65 - 19,23 m³/min |
| Available pressures | 4 / 5 bar |
| Noise level | 68 dB(A) |
| Air outlet | DN65 |
| Starting | Y-Δ |
| Drive | Direct |
| Voltage | 400V/ |
| Dimensions (L × W × H) | 2285 × 1500 × 1710 mm |
| Weight | 3 750 kg |
| Energy at 4,000 h/yr, full load | ≈ 300 000 kWh |
| Conformity | CE · PED · ISO 9001 |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Dryer 23 m³/minRefrigerated dryer (air) · CZ-DM200NF
Filtration 25 m³/minFilter elements · CZ-ELEM-250
Air receiver 5 000 LVertical tank · CZ-TANK-V5000Two extra years for as long as the machine stays supervised by SEENTINEL; the warranty reverts to three years if supervision ends. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →Why this machine
Air-end designed for low pressure, instead of an 8 bar compressor turned down: for the same flow, the air is not compressed higher than it is used.
Twenty-seven sizes from 22 to 250 kW, from 6.1 to 68 m³/min between 3 and 5 bar, for uses that consume a lot of air at low pressure.
Compress only to the pressure required: each bar avoided saves about 7% of energy, according to the US Department of Energy's Sourcebook, over the whole life of the installation.