5.5 kW permanent-magnet VSD screw compressor
5.5 kW permanent-magnet VSD screw compressor: 5.5 kW (8 HP), up to 0.95 m³/min, 8 bar.
Specifications
| Reference | CZ-SMART-7 |
| Motor power | 5.5 kW / 7.5 HP |
| Flow at 8 bar | 0.95 m³/min |
| Available pressures | 8 bar |
| Starting | VFD |
| Drive | Direct PM VSD |
| Voltage | 400V/ |
| Energy at 4,000 h/yr, full load | ≈ 22,000 kWh |
| Conformity | CE |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Three extra years for as long as the machine stays supervised by SEENTINEL and its maintenance is kept up to date; otherwise the warranty reverts to two years. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →The dryer for this machine
Chosen on this machine's flow and pressure: the tightest fit, then one size up. A hot room or hot inlet air is corrected with the quote.
Workshop air: the air no longer condenses in a heated workshop.
CZ-OFD-1Tightest fit1.20 m³/min2 - 16 barRefrigerated dryer (air)Quote with this dryer →
CZ-DM015NFOne size up1.50 m³/min6 - 10 barRefrigerated dryer (air)Quote with this dryer →
Dry air: water no longer forms, even outdoors in winter.
CZ-ST100Tightest fit1 m³/min4.5 - 10 barHeatless adsorption dryerQuote with this dryer →
CZ-ST150One size up1.50 m³/min4.5 - 10 barHeatless adsorption dryerQuote with this dryer →
Why this machine
The drive sets the motor speed to what the workshop consumes. Depending on size, flow turns down to 32 to 45% of rated: the 75 kW modulates from 5.55 to 12.35 m³/min.
At fixed speed, a screw with no demand left runs unloaded and still draws 15 to 35% of its power while producing nothing, according to the US Department of Energy's Sourcebook. The drive slows the motor down instead.
IE4 class synchronous motor (IE5 on request), whose efficiency stays high at reduced speed.