4 kW single-phase screw compressor
4 kW single-phase screw compressor: 4 kW (5 HP), up to 0.63 m³/min, 8 to 10 bar, 55 dB(A).
Specifications
| Reference | CZ-OPN-5PV |
| Motor power | 4 kW / 5 HP |
| Flow at 8 bar | 0,63 m³/min |
| Flow at 10 bar | 0,59 m³/min |
| Available pressures | 8 / 10 bar |
| Noise level | 55 dB(A) |
| Air outlet | DN20 (×2) |
| Starting | VFD |
| Drive | Direct PM VSD |
| Voltage | Monophasé ou triphasé |
| Dimensions (L × W × H) | 1200 × 650 × 1150 mm |
| Weight | 190 kg |
| Energy at 4,000 h/yr, full load | ≈ 16 000 kWh |
| Conformity | CE |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Dryer 0.7 m³/minRefrigerated dryer (air) · CZ-DM007NF
Filtration 1.5 m³/minFilter elements · CZ-ELEM-015Two extra years for as long as the machine stays supervised by SEENTINEL; the warranty reverts to three years if supervision ends. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →Why this machine
Runs on a standard single-phase socket: no three-phase upgrade needed. Immediate installation where the piston compressor used to be the default.
Air delivered continuously, without pulsation, with a noise level far below that of a piston compressor of comparable flow.
The air-end has no parts in reciprocating friction: service life and maintenance intervals well beyond those of a piston, for daily workshop use.