5.5 kW single-phase screw compressor
5.5 kW single-phase screw compressor: 5.5 kW (8 HP), up to 0.95 m³/min, 8 to 10 bar, 60 dB(A).
Specifications
Technical datasheetPDF · 2 pages · in French| Reference | CZ-OPR-7PV |
| Motor power | 5.5 kW / 7.5 HP |
| Flow at 8 bar | 0.95 m³/min |
| Flow at 10 bar | 0.70 m³/min |
| Available pressures | 8 / 10 bar |
| Noise level | 60 dB(A) |
| Air outlet | DN15 |
| Starting | VFD |
| Drive | Direct PM VSD |
| Voltage | Monophasé ou triphasé |
| Dimensions (L × W × H) | 1400 × 650 × 1200 mm |
| Weight | 260 kg |
| Energy at 4,000 h/yr, full load | ≈ 22,000 kWh |
| Conformity | CE |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Three extra years for as long as the machine stays supervised by SEENTINEL and its maintenance is kept up to date; otherwise the warranty reverts to two years. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →The dryer for this machine
Drying is built into this machine: nothing to add.
Why this machine
Runs on a standard single-phase socket: no three-phase upgrade needed. Immediate installation where the piston compressor used to be the default.
Air delivered continuously, without pulsation, with a noise level far below that of a piston compressor of comparable flow.
The air-end has no parts in reciprocating friction: service life and maintenance intervals well beyond those of a piston, for daily workshop use.