7.5 kW single-phase screw compressor
7.5 kW single-phase screw compressor: 7.5 kW (10 HP), up to 0.98 m³/min, 8 bar.
Specifications
| Reference | CZ-SLTS-7.5V-8bar |
| Motor power | 7,5 kW / 10 HP |
| Flow at 8 bar | 0,98 m³/min |
| Available pressures | 8 bar |
| Air outlet | G1/2 |
| Voltage | 220/380V |
| Dimensions (L × W × H) | 1060 × 560 × 1270 mm |
| Energy at 4,000 h/yr, full load | ≈ 30 000 kWh |
| Conformity | CE · PED · ISO 9001 |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Dryer 1.2 m³/minRefrigerated dryer (air) · CZ-OFD-1
Filtration 1.5 m³/minFilter elements · CZ-ELEM-015
Air receiver 200 LVertical tank · CZ-TANK-V200Two extra years for as long as the machine stays supervised by SEENTINEL; the warranty reverts to three years if supervision ends. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →Why this machine
Runs on a standard single-phase socket: no three-phase upgrade needed. Immediate installation where the piston compressor used to be the default.
Air delivered continuously, without pulsation, with a noise level far below that of a piston compressor of comparable flow.
The air-end has no parts in reciprocating friction: service life and maintenance intervals well beyond those of a piston, for daily workshop use.