9 kW single-phase screw compressor
9 kW single-phase screw compressor: 9 kW (12 HP), up to 1.2 m³/min, 8 bar.
Specifications
| Reference | CZ-SLTS-9V-8bar |
| Motor power | 9 kW / 12 HP |
| Flow at 8 bar | 1.20 m³/min |
| Available pressures | 8 bar |
| Air outlet | G1/2 |
| Voltage | 220/380V |
| Dimensions (L × W × H) | 1300 × 580 × 1375 mm |
| Energy at 4,000 h/yr, full load | ≈ 36,000 kWh |
| Conformity | CE · PED · ISO 9001 |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Two extra years for as long as the machine stays supervised by SEENTINEL; the warranty reverts to three years if supervision ends. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →The dryer for this machine
Chosen on this machine's flow and pressure: the tightest fit, then one size up. A hot room or hot inlet air is corrected with the quote.
Workshop air: the air no longer condenses in a heated workshop.
CZ-OFD-1Tightest fit1.20 m³/min2 - 16 barRefrigerated dryer (air)Quote with this dryer →- CZ-DM015NFOne size up1.50 m³/min6 - 10 barRefrigerated dryer (air)Quote with this dryer →
Dry air: water no longer forms, even outdoors in winter.
CZ-ST150Tightest fit1.50 m³/min4.5 - 10 barHeatless adsorption dryerQuote with this dryer →- CZ-MT156One size up1.56 m³/min4.5 - 10 barHeatless adsorption dryerQuote with this dryer →
Why this machine
Runs on a standard single-phase socket: no three-phase upgrade needed. Immediate installation where the piston compressor used to be the default.
Air delivered continuously, without pulsation, with a noise level far below that of a piston compressor of comparable flow.
The air-end has no parts in reciprocating friction: service life and maintenance intervals well beyond those of a piston, for daily workshop use.