185 kW fixed-speed screw compressor
185 kW fixed-speed screw compressor: 185 kW (250 HP), up to 31.9 m³/min, 8 to 13 bar, 75 dB(A).
Specifications
| Reference | CZ-SLT-185F |
| Motor power | 185 kW / 250 HP |
| Flow at 8 bar | 31,90 m³/min |
| Flow at 10 bar | 28,50 m³/min |
| Flow at 13 bar | 23,53 m³/min |
| Available pressures | 8 / 10 / 13 bar |
| Noise level | 75 dB(A) |
| Air outlet | DN100 |
| Starting | Y-Δ |
| Drive | Direct |
| Dimensions (L × W × H) | 3110 × 1940 × 2060 mm |
| Weight | 3 580 kg |
| Energy at 4,000 h/yr, full load | ≈ 740 000 kWh |
| Conformity | CE · PED · ISO 9001 |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Dryer 35 m³/minRefrigerated dryer (air) · CZ-DM300NF
Filtration 40.2 m³/minFilter elements · CZ-ELEM-400
Air receiver 8 000 LVertical tank · CZ-TANK-V8000Two extra years for as long as the machine stays supervised by SEENTINEL; the warranty reverts to three years if supervision ends. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →Why this machine
3rd-generation air-end with an asymmetric profile, mounted on reinforced SKF bearings rated for 80,000 to 100,000 hours: ten to twelve years of service at 8,000 hours a year before they are replaced.
From 1.1 to 44 m³/min, from 7 to 16 bar depending on the model. When the workshop consumes at full capacity all day, fixed speed is the simplest solution to operate.
Up to 75 kW, direct or belt drive depending on the version. From 90 to 250 kW, the air-end is coupled directly to the motor: no belt to re-tension or replace.