30 kW oil-free rotary tooth compressor
30 kW oil-free rotary tooth compressor: 30 kW, up to 4.7 m³/min, 7.5 to 10 bar, 85 dB(A).
Specifications
| Reference | CZ-RM-30VSD-A |
| Motor power | 30 kW |
| Flow at 7.5 bar | 1.88 - 4.70 m³/min |
| Flow at 8.6 bar | 1.76 - 4.40 m³/min |
| Flow at 10 bar | 1.48 - 3.70 m³/min |
| Available pressures | 7.5 / 8.6 / 10 bar |
| Noise level | 85 dB(A) |
| Air outlet | DN40 |
| Starting | Soft start |
| Drive | PM-VSD |
| Voltage | 400V/ |
| Cooling | Air |
| Residual oil content | 0 (Classe 0) |
| Dimensions (L × W × H) | 1636 × 1015 × 1850 mm |
| Weight | 1,490 kg |
| Energy at 4,000 h/yr, full load | ≈ 120,000 kWh |
| Conformity | CE · TUV Class 0 · ISO 8573-1 Cl. 0 · ISO 9001 |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Two extra years for as long as the machine stays supervised by SEENTINEL; the warranty reverts to three years if supervision ends. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →The dryer for this machine
Chosen on this machine's flow and pressure: the tightest fit, then one size up. A hot room or hot inlet air is corrected with the quote.
Dry air: water no longer forms, even outdoors in winter.
CZ-MXW-0696Tightest fit6.96 m³/min4.5 - 10 barHeatless adsorption dryerQuote with this dryer →- CZ-MXW-0875One size up8.75 m³/min4.5 - 10 barHeatless adsorption dryerQuote with this dryer →
Workshop air: the air no longer condenses in a heated workshop.
CZ-DM065NFTightest fit6.50 m³/min6 - 10 barRefrigerated dryer (air)Quote with this dryer →- CZ-DM085NFOne size up8.50 m³/min6 - 10 barRefrigerated dryer (air)Quote with this dryer →
Why this machine
ISO 8573-1 Class 0 achieved by the machine, verified by a TÜV test: the proof does not depend on the filtration installed downstream.
Stainless steel rotors separated by a calibrated clearance, held by timing gears: no friction in the chamber, and therefore no wear.
2.3 to 8.6 m³/min, from 7.5 to 10 bar. Beyond that, several units are installed in parallel or you move to the dry screw.