55 kW oil-free rotary tooth compressor
55 kW oil-free rotary tooth compressor: 55 kW, up to 8.6 m³/min, 7.5 to 10 bar, 85 dB(A).
Specifications
| Reference | CZ-RM-55VSD-A |
| Motor power | 55 kW |
| Flow at 7.5 bar | 3.44 - 8.60 m³/min |
| Flow at 8.6 bar | 3.32 - 8.30 m³/min |
| Flow at 10 bar | 2.96 - 7.40 m³/min |
| Available pressures | 7.5 / 8.6 / 10 bar |
| Noise level | 85 dB(A) |
| Air outlet | DN40 |
| Starting | Soft start |
| Drive | PM-VSD |
| Voltage | 400V/ |
| Cooling | Air |
| Residual oil content | 0 (Classe 0) |
| Dimensions (L × W × H) | 1636 × 1015 × 1850 mm |
| Weight | 1,770 kg |
| Energy at 4,000 h/yr, full load | ≈ 220,000 kWh |
| Conformity | CE · TUV Class 0 · ISO 8573-1 Cl. 0 · ISO 9001 |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Filtration 12.3 m³/minFilter elements · CZ-ELEM-120
Air receiver 2,000 LVertical tank · CZ-TANK-V2000Two extra years for as long as the machine stays supervised by SEENTINEL; the warranty reverts to three years if supervision ends. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →The dryer for this machine
Chosen on this machine's flow and pressure: the tightest fit, then one size up. A hot room or hot inlet air is corrected with the quote.
Dry air: water no longer forms, even outdoors in winter.
CZ-MXW-0875Tightest fit8.75 m³/min4.5 - 10 barHeatless adsorption dryerQuote with this dryer →- CZ-MXW-1063One size up10.63 m³/min4.5 - 10 barHeatless adsorption dryerQuote with this dryer →
Workshop air: the air no longer condenses in a heated workshop.
CZ-DM110NFTightest fit11 m³/min6 - 10 barRefrigerated dryer (air)Quote with this dryer →- CZ-OFD-13One size up13.50 m³/min2 - 16 barRefrigerated dryer (air)Quote with this dryer →
Why this machine
ISO 8573-1 Class 0 achieved by the machine, verified by a TÜV test: the proof does not depend on the filtration installed downstream.
Stainless steel rotors separated by a calibrated clearance, held by timing gears: no friction in the chamber, and therefore no wear.
2.3 to 8.6 m³/min, from 7.5 to 10 bar. Beyond that, several units are installed in parallel or you move to the dry screw.