55 kW rotary vane compressor
55 kW rotary vane compressor: 55 kW (75 HP), up to 10.5 m³/min, 8 to 13 bar, 82 dB(A).
Specifications
| Reference | CZ-VANE-A55 |
| Motor power | 55 kW / 75 HP |
| Flow at 8 bar | 10.50 m³/min |
| Flow at 10 bar | 8.90 m³/min |
| Flow at 13 bar | 7 m³/min |
| Available pressures | 8 / 10 / 13 bar |
| Noise level | 82 dB(A) |
| Air outlet | DN50 |
| Starting | Y-Δ |
| Drive | Direct (rotary vane) |
| Voltage | 400V/ |
| Cooling | Air |
| Residual oil content | <3ppm |
| Dimensions (L × W × H) | 2032 × 907 × 1176 mm |
| Weight | 840 kg |
| Energy at 4,000 h/yr, full load | ≈ 220,000 kWh |
| Conformity | CE · PED · ISO 9001 |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Filtration 12.3 m³/minFilter elements · CZ-ELEM-120
Air receiver 3,000 LVertical tank · CZ-TANK-V3000Two extra years for as long as the machine stays supervised by SEENTINEL; the warranty reverts to three years if supervision ends. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →The dryer for this machine
Chosen on this machine's flow and pressure: the tightest fit, then one size up. A hot room or hot inlet air is corrected with the quote.
Workshop air: the air no longer condenses in a heated workshop.
CZ-DM110NFTightest fit11 m³/min6 - 10 barRefrigerated dryer (air)Quote with this dryer →- CZ-OFD-13One size up13.50 m³/min2 - 16 barRefrigerated dryer (air)Quote with this dryer →
Dry air: water no longer forms, even outdoors in winter.
CZ-MXW-1063Tightest fit10.63 m³/min4.5 - 10 barHeatless adsorption dryerQuote with this dryer →- CZ-MXW-1276One size up12.76 m³/min4.5 - 10 barHeatless adsorption dryerQuote with this dryer →
Why this machine
A single off-centre rotor, coupled to the motor with no belt or gearbox, sweeps the stator with carbon-graphite vanes: few moving parts, no axial thrust.
The vanes slide towards the stator as they wear and keep their seal: efficiency does not degrade with the hours, unlike the clearances that open up in a screw air-end.
The vane air-end accepts the frequent stops and restarts of irregular consumption, from the small workshop to stations that run in bursts.