7.5 kW onboard rotary vane compressor
7.5 kW onboard rotary vane compressor: 7.5 kW, up to 1.39 m³/min, 8 to 13 bar, 76 dB(A).
Specifications
| Reference | CZ-AZX7 |
| Motor power | 7.5 kW |
| Flow at 8 bar | 1.39 m³/min |
| Flow at 10 bar | 1.15 m³/min |
| Flow at 13 bar | 0.95 m³/min |
| Available pressures | 8 / 10 / 13 bar |
| Noise level | 76 dB(A) |
| Air outlet | DN20 |
| Starting | Y-Δ |
| Drive | Direct (rotary vane) |
| Voltage | 400V/ |
| Cooling | Air |
| Residual oil content | <3ppm |
| Dimensions (L × W × H) | 1097 × 400 × 559 mm |
| Weight | 150 kg |
| Energy at 4,000 h/yr, full load | ≈ 30,000 kWh |
| Conformity | CE · ISO 9001 |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Two extra years for as long as the machine stays supervised by SEENTINEL; the warranty reverts to three years if supervision ends. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →The dryer for this machine
Chosen on this machine's flow and pressure: the tightest fit, then one size up. A hot room or hot inlet air is corrected with the quote.
Workshop air: the air no longer condenses in a heated workshop.
CZ-DM015NFTightest fit1.50 m³/min6 - 10 barRefrigerated dryer (air)Quote with this dryer →- CZ-OFD-2One size up2.40 m³/min2 - 16 barRefrigerated dryer (air)Quote with this dryer →
Dry air: water no longer forms, even outdoors in winter.
CZ-ST150Tightest fit1.50 m³/min4.5 - 10 barHeatless adsorption dryerQuote with this dryer →- CZ-MT156One size up1.56 m³/min4.5 - 10 barHeatless adsorption dryerQuote with this dryer →
Why this machine
From 900 × 310 × 492 mm and 100 kg: minimal footprint for mounting on the chassis or in the bodywork, where space is tight.
The low-speed vane air-end absorbs the vibration and shocks of travel without loss of reliability, a decisive asset on board.
Accepts the frequent stops and restarts typical of onboard use.