4 kW tank-mounted rotary vane compressor
4 kW tank-mounted rotary vane compressor: 4 kW (6 HP), up to 0.68 m³/min, 8 to 13 bar, 72 dB(A).
Specifications
| Reference | CZ-VANE-ASM4 |
| Motor power | 4 kW / 5.5 HP |
| Flow at 8 bar | 0.68 m³/min |
| Flow at 10 bar | 0.53 m³/min |
| Flow at 13 bar | 0.48 m³/min |
| Available pressures | 8 / 10 / 13 bar |
| Noise level | 72 dB(A) |
| Air outlet | DN15 |
| Starting | Y-Δ |
| Drive | Direct (rotary vane) |
| Voltage | 400V/ |
| Cooling | Air |
| Residual oil content | <3ppm |
| Dimensions (L × W × H) | 1051 × 416 × 706 mm |
| Weight | 115 kg |
| Energy at 4,000 h/yr, full load | ≈ 16,000 kWh |
| Conformity | CE · PED · ISO 9001 |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Two extra years for as long as the machine stays supervised by SEENTINEL; the warranty reverts to three years if supervision ends. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →The dryer for this machine
Chosen on this machine's flow and pressure: the tightest fit, then one size up. A hot room or hot inlet air is corrected with the quote.
Workshop air: the air no longer condenses in a heated workshop.
CZ-DM007NFTightest fit0.70 m³/min6 - 10 barRefrigerated dryer (air)Quote with this dryer →- CZ-OFD-1One size up1.20 m³/min2 - 16 barRefrigerated dryer (air)Quote with this dryer →
Dry air: water no longer forms, even outdoors in winter.
CZ-ST080Tightest fit0.80 m³/min4.5 - 10 barHeatless adsorption dryerQuote with this dryer →- CZ-ST100One size up1 m³/min4.5 - 10 barHeatless adsorption dryerQuote with this dryer →
Why this machine
Vane air-end + 200/400 L receiver, pre-assembled and tested: a single machine to set down and connect.
The buffer receiver smooths the pressure and reduces the compressor's on/off cycles: less wear and less energy.
Delivered factory-tested: no installation study or piping to design, quick commissioning.