30 kW fixed-speed screw compressor
30 kW fixed-speed screw compressor: 30 kW (40 HP), up to 5.3 m³/min, 7 to 12 bar, 66 dB(A).
Specifications
Technical datasheetPDF · 2 pages · in French| Reference | CZ-OPP-40F |
| Motor power | 30 kW / 40 HP |
| Flow at 7 bar | 5.30 m³/min |
| Flow at 8 bar | 5 m³/min |
| Flow at 10 bar | 4.50 m³/min |
| Flow at 12 bar | 4 m³/min |
| Available pressures | 7 / 8 / 10 / 12 bar |
| Noise level | 66 dB(A) |
| Air outlet | DN40 |
| Starting | Y-Δ |
| Drive | Direct |
| Dimensions (L × W × H) | 1500 × 950 × 1250 mm |
| Weight | 550 kg |
| Energy at 4,000 h/yr, full load | ≈ 120,000 kWh |
| Conformity | CE |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Three extra years for as long as the machine stays supervised by SEENTINEL and its maintenance is kept up to date; otherwise the warranty reverts to two years. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →The dryer for this machine
Chosen on this machine's flow and pressure: the tightest fit, then one size up. A hot room or hot inlet air is corrected with the quote.
Workshop air: the air no longer condenses in a heated workshop.
CZ-DM065NFTightest fit6.50 m³/min6 - 10 barRefrigerated dryer (air)Quote with this dryer →
CZ-DM085NFOne size up8.50 m³/min6 - 10 barRefrigerated dryer (air)Quote with this dryer →
Dry air: water no longer forms, even outdoors in winter.
CZ-MXW-0696Tightest fit6.96 m³/min4.5 - 10 barHeatless adsorption dryerQuote with this dryer →
CZ-MXW-0875One size up8.75 m³/min4.5 - 10 barHeatless adsorption dryerQuote with this dryer →
Why this machine
3rd-generation air-end with an asymmetric profile, mounted on reinforced SKF bearings rated for 80,000 to 100,000 hours: ten to twelve years of service at 8,000 hours a year before they are replaced.
From 1.1 to 44 m³/min, from 7 to 16 bar depending on the model. When the workshop consumes at full capacity all day, fixed speed is the simplest solution to operate.
Up to 75 kW, direct or belt drive depending on the version. From 90 to 250 kW, the air-end is coupled directly to the motor: no belt to re-tension or replace.