37 kW fixed-speed screw compressor
37 kW fixed-speed screw compressor: 37 kW (50 HP), up to 6.8 m³/min, 7 to 12 bar, 66 dB(A).
Specifications
| Reference | CZ-OPP-50F |
| Motor power | 37 kW / 50 HP |
| Flow at 7 bar | 6,80 m³/min |
| Flow at 8 bar | 6,20 m³/min |
| Flow at 10 bar | 5,60 m³/min |
| Flow at 12 bar | 5 m³/min |
| Available pressures | 7 / 8 / 10 / 12 bar |
| Noise level | 66 dB(A) |
| Air outlet | DN40 |
| Starting | Y-Δ |
| Drive | Direct |
| Dimensions (L × W × H) | 1500 × 950 × 1250 mm |
| Weight | 550 kg |
| Energy at 4,000 h/yr, full load | ≈ 148 000 kWh |
| Conformity | CE |
What goes with it
Sized on this machine's flow. Air quality is decided here, not in the compressor.
Dryer 6.5 m³/minRefrigerated dryer (air) · CZ-DM065NF
Filtration 8.5 m³/minFilter elements · CZ-ELEM-085
Air receiver 1 500 LVertical tank · CZ-TANK-V1500Two extra years for as long as the machine stays supervised by SEENTINEL; the warranty reverts to three years if supervision ends. Parts available for 10 years, shipped within 24 to 48 hours in France.
Quote this machine →Why this machine
3rd-generation air-end with an asymmetric profile, mounted on reinforced SKF bearings rated for 80,000 to 100,000 hours: ten to twelve years of service at 8,000 hours a year before they are replaced.
From 1.1 to 44 m³/min, from 7 to 16 bar depending on the model. When the workshop consumes at full capacity all day, fixed speed is the simplest solution to operate.
Up to 75 kW, direct or belt drive depending on the version. From 90 to 250 kW, the air-end is coupled directly to the motor: no belt to re-tension or replace.